EMS TopGun Product no. 0508(0902) Q&A section ¡@
Q1) What is #0508(0902) EMS TopGun ? Projector, as well as traditional CRT TV. (i.e. normal TV) It supports PS3™, PS2™, Xbox™ and PC. ¡@ Q2) What is the difference between the two versions of TopGun, #0508 and #0508(0902) ? A) The function of the two versions are the same. One of the differences is that, the LED stands of #0508 and #0508(0902) are different. The LED stands of #0508 has 5 sets of infrared LED, while that of #0508(0902) only has 4 sets of infrared LED. Please refer to the following pictures. ¡@ LED stands for #0508
LED stands for #0508(#0902)
¡@ Moreover, the hardware calibration procedure for #0508 and #0508(0902) are different. For #0508, user have to shoot 6 points (A-F) in the hardware calibration mode. For #0508(0902), user have to shoot 5 points (A-E) in the hardware calibration mode. ¡@ #0508 #0508(0902)
¡@ ** #0508(0902) EMS TopGun is compatible with #0718 EMS TopGun II and #0807 RF TopGun for 2 players games. It does not work with old #0508 EMS TopGun. **
and #0508(0902) EMS TopGun ? A) Here are the differences:
note : #1003 Target Box is not a lightgun,
but it enable your Air Gun to support video games. Simply mount Target Box ¡@
Q4) How to set up and use
the #0508(0902) EMS TopGun? EMS TopGun to your PC or console (PS3™/PS2™/ Xbox™), note that you have to select the switch at the bottom of the gun to "X" for Xbox™, and "P" for PS2™ or PC. And then, after you have well calibrated the gun, you can use the gun. For details, please see the User Manual. ¡@ Q5) The #0508(0902) EMS TopGun is not accurate at all even I have re-calibrated it for many times. Why is that? A) It may be because there are some infrared source behind or beside the screen, such that the #508(0902) EMS TopGun system is interrupted.
A) To solve this problem, please make sure that no infrared source is behind or beside the screen. Possible infrared source include sun light, tungsten filaments light bulb, or any high temperature light sources such as spotlight. Also, the ground may reflect the light (infrared) from the LED stand. To prevent reflection, please place a cloth on the ground near the screen
so as to prevent the reflection. Q7) What should I do if there is something wrong during the calibrating process ? A) For this case, you can press START + SE/BA at the same time during the calibrating process, and it would escape from the calibrating mode, and you can re-start the calibrating process again. For details, please see the calibration guide in the User Manual. ¡@ Q8) Could I place the two LED stands behind the cloth projector screen ? A ) We have tried that. It is workable to place the LED stands behind the cloth projector screen. But please note that our cloth projector screen may be thinner then yours, thus we could not conclude that every cloth projector screens are workable for this setup. ¡@ Q9) Could I use two #0508(0902) EMS TopGun to play at the same time on the same screen ? A) Yes, you can use two #0508(0902) EMS TopGun at the same time in Xbox™, PS2™, PS3™ and PC. Please note that when you use two #0508(0902) EMS TopGun at the same time on the same screen, you just need to setup one set of LED stands. Otherwise it would fail to work. ¡@ Q10) Could I use #0508(0902) EMS TopGun and #0508 EMS TopGun / #0718 EMS TopGun II / #0807 RF TopGun on the same screen at the same time ? A) #0508(0902) EMS TopGun is compatible with #0718 EMS TopGun II and #0807 RF TopGun for 2 players games. But, it does not work with old #0508 EMS TopGun. Please note that the LED stands of #0508(0902) EMS TopGun / #0718 EMS TopGun II / #0807 RF TopGun are the same. But, they are different from that of old #0508 EMS TopGun. Please refer to Q2. ¡@ Q11) #0508(0902) EMS TopGun works perfectly in PS2™, but I can't enter Calibration mode in PC, what's the matter ? A) Please make sure that the driver is workable (i.e recognized in the device manager, without a interjection mark beside it), otherwise you would not able to use the gun nor enter the calibration mode in PC. ¡@ Q12) #0508(0902) EMS TopGun works perfectly in PC, but I can't enter Calibration mode in PS2™, what's the matter ? A) Please make sure the followings: i) the switch (X/P) is at P. ii) you are running a GunCon2™ compatible game. (e.g. Time Crsis 2) iii) you should load the game first before you plug in the gun. ¡@ Q13) In the calibration mode of a PS2™ gun game, the PS2™ fail to recognize the shoot, what's the matter ? A) Please load the game first before you plug in the gun, and make sure that the game is GunCon2™ compatible. ¡@ Q14) Does #0508(0902) EMS TopGun supports GunCon™ / GunCon3™ comaptible games? A) Please note that #0508(0902) EMS TopGun could only supports GunCon2™ compatible games (e.g. Time Crisis 3). GunCon™ compatible games (e.g. Area 51) and GunCon3™ compatible games (e.g. Time Crisis 4) are not supported. ¡@ Q15) In PS2™, could I use the #0508(0902) EMS TopGun together with PS2™ joypads ? A) In gun shooting games, if you connect a joypad to player 1, the USB input 1 would be disabled. Therefore, if you are going to use the #0508(0902) EMS TopGun, you should not connect the joypad to PS2™. ¡@ Q16) Is #0508 EMS TopGun compatible with #0802 TopGun Blaze Stand II ? Also, is #0508(0902) EMS TopGun compatible with #0607 TopGun Blaze Stand ? A) #0508 EMS TopGun is only compatible with #0607 TopGun Blaze Stand, but not #0802 TopGun Blaze Stand II. #0508(0902) EMS TopGun is only compatible with #0802 TopGun Blaze Stand II, but not #0607 TopGun Blaze Stand. ¡@ Q17) I find that my TopGun always miss in the calibration mode in the game Time Crisis 2. What's the matter ? A) Please note the followings when you use the gun. i) You must load the game first before you connect the gun to the console. ii) Before you start the software calibration in the game Time Crisis 2, you must finish the hardware
calibration first. Please refer to the manual.
WARNING ¡@ email : sales@hkems.com |